Chelsea Grin – BUS INVADERS Ep. 1338 [Warped Edition 2018]

Hey, what up? This is Chelsea grin, come on in Okay, so we’re I hear on Warped Tour and we thought would give you a little tour of our home this is our little front lounge aka living room and Got Steven here. Yeah, what’s up guys? How’s it hanging out? What are you watching? […]

Building a Fender – Part 1

these are selected scenes from the 119 minute long scratch-building offenders DVD check out all the Covelli they all dot is what’s on the table is a fender for a 36 Ford and our goal for today is to make a fender that duplicates this for the other side of the car I think you […]

Lithium Batteries Dropped in Water

Hey guys, I’m Nate welcome back to the king of random today We’re going to be trying out something a little bit different in that this whole video is going to be one Take. We’re going to show you an experiment from start to finish, without cutting the camera to several different angles We wanted […]

How To Polish Chrome – Car Detailing With Chemical Guys

Today in the Detail Garage we’re polishing chrome. We’re doing the finishing touches on our 1970 Chevelle detail, and you can see we have a lot of chrome all around the vehicle! There’s polished chrome on the bumper, headlights, around all the windows, windshield, and even the rear view mirror! We want to make this […]

How To Remove Rust on Metal Car Part Safely & Quickly

Hi I’m Rick, I am at the Chrysler show here at Carlisle, and uh….Metal Rescue is going to see if it can rescue my water pump housing, in about 6 to 9 hours and we’ll see what they can do with it. (Why don’t you hold this way, we’ll get how bad this is. How […]

How to MIG Weld, Repair a Door or Fender and Save Money from Eastwood

as mark on today’s rd corner we’re going to teach you how to make well show your real world application by preparedness door skin here we’re going to do is show you the performance and value of these units and how they can pay for themselves in the first job let’s get started all right […]

PRE Painting Prep – Clean Parts for Paint – from Eastwood

PRE Paint Prep If you are looking for the perfect way to remove silicone, wax, grease and dirt, use Eastwood’s pre-paint prep. Just spray it on and wipe it off. It helps promote paint adhesion and should always be the final step in metal and autobody paint prep. It is also great for cleaning parts […]

Hydraulic Lowrider Cars Defy Gravity

00:05 COMM: With just a flick of a switch, £3000 of metal bounces up and down 8ft in the air. 25 year old Alex Tuoson creates tees custom low rider cars that defy gravity at his father’s shop Hoppos Custom Suspension Works. 00:24 ALEX: we specialise in after market suspension particularly Hydraulic air suspension. 00:30 […]

How To Straighten Metal On Car Parts

– Hey this is Donnie Smith. This lesson, we’re gonna talk about dent repair. Now before we just jump on this car and start repairing this dent, it’s important for any repair job to wash it good with soap and water to remove all the contaminants, the waxes and greases. We’ve already done that, we […]

BattleBots Team Valkyrie | 3D Printed Combat Robots

Valkyrie is a 250-pound combat robot for the TV show Battlebots on Discovery and the Science Channel. We are a stealth jet inspired body and an under cutter blade blade spins at 250 miles an hour and the blade itself weighs about 65 pounds. We have a very tricky aesthetic so one the first things […]